Meena Rezkallah, P.Eng.
Updated: Dec 20, 2020
The most common type of restraint is that which rigidly resists weight; in other words it only acts against the downward movement of the pipe. Because it is the most common type, it merits two names — hanger and support. A hanger is specifically a rigid restraint, resisting only downward pipe movement, with a point of attachment above the pipe, that is, using a rod hanger assembly of some type. Typical hangers are shown in Figure 3-98. These are coded in CAESAR II as +Y restraints (where - or + preceding the restraint direction indicates one-way restraint), indicating that the restraint acts in the +Y direction against the pipe. Since the pipe has no structure to rub against, friction is not modeled.
Our professional piping stress engineers have a bachelor's and Masters degree in mechanical / structural engineering and province licence (P.Eng.) in Alberta, Saskatchewan, British Columbia and Ontario. We review, validate, certify and stamp piping and structural packages.