If you are looking for training courses in Piping stress analysis, Process Piping Design (ASME B31.3), or Engineering Consultant Services; Little P.Eng. for Engineers Training is ready to help you across Calgary, AB, surrounding cities, San Francisco, Bay area California.
Unrestrained portions of pipeline systems shall be designed to have sufficient flexibility to prevent thermal expansion and contraction from causing excessive stresses in the piping material, excessive bending and unusual loads at joints, and undesirable forces a...
The general stress design criteria for pipeline systems in this Standard are limited to elastic stress analysis for the design conditions in Clause 4.2 and provide design specifications for
4.5.1 Buttwelded joints
Buttwelded joints shall be as specified in Clauses 7.2 to 7.15.
Consideration shall be given to avoiding welding stresses that can result in damage to any cement- mortar lining.
Where piping containing partial-penetratio...
Isolating valves shall be installed for the purpose of isolating the pipeline for maintenance and for response to operating emergencies.
Valves shall be at locations accessible to authorized personnel and protected from damage or tampering, and shall be sui...