UA-69298255-1 Blog Little P.Eng. for Engineers Training

August 28, 2019

The maximum steel pipe support spacingfor power piping and water applications as per ASME B31.1 and ANSI/MSS SP-69 & SP-58

  • ASME B31.1 power piping Table 121.5 for max. pipe support spacing.

  • For water application you can use ANSI/MSS SP-69 & SP-58 Tables 3 and...

August 26, 2019

Little P.Eng. for Engineers Training Proudly offers the most affordable courses in California; ASME B31.3 is one of them. This specialist course provides complete comprehensive coverage of ASME B31.3 - Process Piping Code requirements for the design, construction and i...

May 23, 2018

Piping loads are classified into three types: sustained loads, occasional loads, and expansion loads. These three types of loads and the corresponding analysis will be discussed in this section in detail.

Method of analysis. The piping stress analysis to be performed cou...

April 20, 2018

Failure Theories

The failure theories most commonly used in describing the strength of piping systems are the maximum principal stress theory and the maximum shear stress theory (also known as the Tresca criterion).
The maximum principal stress theory forms the basis fo...

March 27, 2018

The Designer may have more than one thermal expansion or other displacement cycle conditions to consider. Cycles at lower stress ranges are substantially less damaging than cycles at higher stress ranges. ASME B31.3 uses the cycle with the highest stress range (full di...

March 16, 2018

Allowable Stress For Thermal Expansion

The allowable stress for thermal expansion and other deformation-induced stresses is substantially higher than for sustained loads. This is due to the difference between load-controlled conditions, such as weight and pressure, and...

March 16, 2018

The participant of this seminar will have an overview of the codes and standards governing the design of pressure retaining components and the piping design process. By the end of the seminar, the participant will understand pipe sizing for various flow conditions and...

March 11, 2018

Sustained loads and Occasional loads are among the most important concerns as per ASME B31.3 Code. Thus, Little P.Eng. For Engineers Training explains in detail how to design piping systems against Primary Longitudinal Stress, Sustained Longitudinal Stress and their li...

February 16, 2018

The piping industry today is very diverse in its use of computer-aided design. This diversity is shown by the various levels of sophistication of the CAD applications in use by different segments of the industry. Even within the same company, the sophistication of CAD...

February 9, 2018

The power industry, through its many years of experience, has found that piping arrangements and layout can influence the functionality of a piping system. This section will present specific system guidelines and considerations that will enable the piping designer to min...

Please reload

Categories

LITTLE P.ENG. FOR ENGINEERS TRAINING

3705 Fonda Way #18 Southeast Calgary, T2A 6G9

Canada

Bay area, California

Stay Connected

  • Yelp Social Icon
  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon
  • yp-logo-original
  • Yelp Social Icon
  • Google Places Social Icon
  • Pinterest Social Icon