UA-69298255-1 Blog Little P.Eng. for Engineers Training

August 28, 2019

The maximum steel pipe support spacingfor power piping and water applications as per ASME B31.1 and ANSI/MSS SP-69 & SP-58

  • ASME B31.1 power piping Table 121.5 for max. pipe support spacing.

  • For water application you can use ANSI/MSS SP-69 & SP-58 Tables 3 and...

April 13, 2019

This Module in the Welding Institute of Canada’s series on “Fundamentals of Welding Technology” is aimed at creating a general awareness of health and safety aspects of welding and related processes. It is intended to provide a background for welders, welding superviso...

May 23, 2018

Piping loads are classified into three types: sustained loads, occasional loads, and expansion loads. These three types of loads and the corresponding analysis will be discussed in this section in detail.

Method of analysis. The piping stress analysis to be performed cou...

April 20, 2018

Failure Theories

The failure theories most commonly used in describing the strength of piping systems are the maximum principal stress theory and the maximum shear stress theory (also known as the Tresca criterion).
The maximum principal stress theory forms the basis fo...

March 16, 2018

The participant of this seminar will have an overview of the codes and standards governing the design of pressure retaining components and the piping design process. By the end of the seminar, the participant will understand pipe sizing for various flow conditions and...

February 16, 2018

The piping industry today is very diverse in its use of computer-aided design. This diversity is shown by the various levels of sophistication of the CAD applications in use by different segments of the industry. Even within the same company, the sophistication of CAD...

February 9, 2018

The power industry, through its many years of experience, has found that piping arrangements and layout can influence the functionality of a piping system. This section will present specific system guidelines and considerations that will enable the piping designer to min...

February 2, 2018

Project Client and Owner Requirements

Most projects have project-specific requirements imposed by the owner. These usually include additional requirements above the codes and standards which may have direct impact on both pipe layout and equipment location. Most of these...

January 4, 2018

These codes and standards were written to establish minimum requirements for safe design and construction with very little reference to the physical routing of piping. However, the piping designer should be familiar with them as they apply to his or her work. There are...

January 3, 2018

Piping is a major expenditure in the design and construction of industrial, refinery, petrochemical, or power-generating plants when one considers engineering costs, material costs, and fabrication and field labor costs. Proper planning and execution of the design and ro...

Please reload

Categories

LITTLE P.ENG. FOR ENGINEERS TRAINING

3705 Fonda Way #18 Southeast Calgary, T2A 6G9

Canada

Bay area, California

Stay Connected

  • Yelp Social Icon
  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon
  • yp-logo-original
  • Yelp Social Icon
  • Google Places Social Icon
  • Pinterest Social Icon