LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES

Dear engineers, If you are searching for "Valves" or "Valves Types" the article below present all the information about valves types, installation and operation. Read Valves Types Part 1 Ball Valves The ball valve (Fig. A10.20) is a quarter-turn valve suitable for clean gas, compressed air, and liquid service. They also can be used for slurry service, but provisions for prevention of crud buildup must be made. The use of soft-seat materials such as nylon, delrin, synthetic ru

Dear engineers, If you are searching for "Valves" or "Valves Types" the article below present all the information about valves types, installation and operation. Read Valves Types Part 2 Gate Valves Gate valves are primarily designed to serve as isolation valves. In service, these valves generally are either fully open or fully closed. When fully open, the fluid or gas flows through the valve in a straight line with very little resistance. Gate valves should not be used in th