UA-69298255-1 UA-69298255-2

May 17, 2020

As described in Introduction to Pipe Stress Analysis, the pipe stress analyst is concerned with two types of loads — primary and secondary. Not only are the causes and the failure modes of these two loading types quite different, but not surprisingly, the solutions to...

August 26, 2019

Little P.Eng. for Engineers Training Proudly offers the most affordable courses in California; ASME B31.3 is one of them. This specialist course provides complete comprehensive coverage of ASME B31.3 - Process Piping Code requirements for the design, construction and i...

May 23, 2018

Piping loads are classified into three types: sustained loads, occasional loads, and expansion loads. These three types of loads and the corresponding analysis will be discussed in this section in detail.

Method of analysis. The piping stress analysis to be performed cou...

March 11, 2018

Sustained loads and Occasional loads are among the most important concerns as per ASME B31.3 Code. Thus, Little P.Eng. For Engineers Training explains in detail how to design piping systems against Primary Longitudinal Stress, Sustained Longitudinal Stress and their li...

February 2, 2018

Project Client and Owner Requirements

Most projects have project-specific requirements imposed by the owner. These usually include additional requirements above the codes and standards which may have direct impact on both pipe layout and equipment location. Most of these...

Please reload

Categories

LITTLE P.ENG. FOR ENGINEERS TRAINING /  Engineering Consultant

3705 Fonda Way #18 Southeast Calgary, T2A 6G9

Canada

+1 (587) 802-4050

Stay Connected

  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon
  • LinkedIn
  • yp-logo-original
  • Yelp Social Icon
  • Google Places Social Icon
  • Pinterest Social Icon
  • Tumblr
  • Facebook Social Icon
RSS Feed