UA-69298255-1 UA-69298255-2 Blog Little P.Eng. for Engineers Training & Engineering Services

June 3, 2020

What if the calculated expansion stress range is too high? How can we reduce it? 


Consider the initial example, with the pipe fully anchored at its ends. What would happen in real life? The restraints would probably bend some under the enormous load, allowing some pipi...

June 1, 2020

The previous discussion has primarily concerned the effect of supports on system stresses. The engineer is also interested in determining loads on supports and nozzles, in order to select the appropriate support hardware, to check the overloading of equipment, or to ca...

March 11, 2020

In order to properly design a piping system, the engineer must understand both a system's behavior under potential loadings, as well as the regulatory requirements imposed upon it by the governing codes.


A system's behavior can be quantified through the aggregate...

July 17, 2017

CAESAR II is a software package for piping flexibility analysis with automated code compliance checks. It is easy to use and includes several advanced modules for specialized problems. CAESAR II can nowadays be seen as the “bread and butter” of any pipe stress engineer...

July 9, 2017

Pipe Stress Analysis software

Since its introduction in 1984, CAESAR II from Intergraph Corporation has become the world’s most widely used pipe stress analysis software and is considered the industry’s de facto standard. CAESAR II is a complete pipe stress analysis sof...

Please reload

Categories

LITTLE P.ENG. FOR ENGINEERS TRAINING /  Engineering Consultant

3705 Fonda Way #18 Southeast Calgary, T2A 6G9

Canada

+1 (587) 802-4050

Stay Connected

  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon
  • LinkedIn
  • yp-logo-original
  • Yelp Social Icon
  • Google Places Social Icon
  • Pinterest Social Icon
  • Tumblr
  • Facebook Social Icon
RSS Feed