UA-69298255-1 UA-69298255-2 Blog Little P.Eng. for Engineers Training & Engineering Services

July 3, 2017

Definition of Control Valves

Unlike valves in a piping system that primarily serve to shut off, drain, fill, or divert, control valves are a part of an automated control system. They are considered the ‘‘final control element’’ in an automated and usually very sophistic...

July 3, 2017

The following guidelines are provided to assist in selecting a suitable valve for any application. These guidelines are intended to cover all physical features and capabilities or limitations of different types of valves and which may be suitable for one particular app...

July 3, 2017

A brief discussion is provided to assist the user in understanding the considerations affecting the selection of the type of actuators required for an application. Manually actuated valves do not change position due to a change in the mode of system operation or an acc...

July 3, 2017

Safety Valves and Pressure-Relief Devices

Safety valves and pressure-relief valves are automatic pressure-relieving devices used for over pressure protection of piping and equipment. Safety valves (Fig. A10.32) are generally used in gas or vapor service because their op...

July 3, 2017

Dear engineers, If you are searching for "Valves" or "Valves Types" the article below present all the information about valves types, installation and operation.

Read Valves Types Part 1

Ball Valves

The ball valve (Fig. A10.20) is a quarter-turn valve suitable for clean g...

Please reload



3705 Fonda Way #18 Southeast Calgary, T2A 6G9


+1 (587) 802-4050

Stay Connected

  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon
  • LinkedIn
  • yp-logo-original
  • Yelp Social Icon
  • Google Places Social Icon
  • Pinterest Social Icon
  • Tumblr
  • Facebook Social Icon
RSS Feed