UA-69298255-1 UA-69298255-2

CSA Z 662 Reference publications and definitions

2.1 Reference publications There is a commentary available for this Clause. This Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, unless the user finds it more appropriate to use newer or amended editions of such publications. CSA Group A3000-13 Cementitious materials compendium A3001-13 Cementitious materials for use in concrete A3002-13 Masonry and mortar cement B51-14 Boiler, Pressure Vessel, and Pressure Piping Code B137 Series-13 Thermoplastic pressure piping compendium B149.1-10 Natural Gas and Propane Installation Code B149.2-10 Propane Storage and Handling Code C22.1-15 Canadian Electrical Code, Part I CAN/CSA-C22.3 No. 4-13 Control of electrochemical corrosion of underground metallic structures CAN/CSA-C22.3 No. 6-13 Principles and practices of electrical coordination between pipelines and electric supply lines PLUS 663-04 Land use planning for pipelines: A guideline for local authorities, developers, and pipeline operators S408-1981-11 Guidelines for the development of limit states design standards CAN/CSA-S471-04 (withdrawn) General requirements, design criteria, the environment, and loads

W48-14 Filler metals and allied materials for metal arc welding W59-13 Welded steel construction (metal arc welding) W178.2-14 Certification of welding inspectors Z245.1-14 Steel pipe Z245.6-06 (R2011) Coiled aluminum line pipe and accessories Z245.11-13 Steel fittings Z245.12-13 Steel flanges Z245.15-13 Steel valves Z245.20 Series-14 Plant-applied external coatings for steel pipe Z245.20-14 Plant-applied external fusion bond epoxy coating for steel pipe Z245.21-14 Plant-applied external polyethylene coating for steel pipe Z245.22-14 Plant-applied external polyurethane foam insulation coating for steel pipe Z245.30-14 Field-applied external coatings for steel pipeline systems Z246.1-13 Security management for petroleum and natural gas industry systems Z276-15 Liquefied natural gas (LNG) — Production, storage, and handling Z341 Series-14 Storage of hydrocarbons in underground formations CAN/CSA-Z731-03 (R2014) Emergency preparedness and response

CAN/CSA-ISO 9001-08 (R2014) Quality management systems — Requirements CAN/CSA-ISO 31000-10 Risk management — Principles and guidelines AGA (American Gas Association) B109.1-2000 (R2008) Diaphragm-Type Gas Displacement Meters (Under 500 Cubic Feet per Hour Capacity) (Catalogue # XQ0008) API (American Petroleum Institute) 5L-2012 (SPEC) Specification for Line Pipe 5LCP-2006 (R2013) (SPEC) Coiled Line Pipe 6D-2014 (SPEC) Specification for Pipeline and Piping Valves 15HR-2001 (R2010) (SPEC) High Pressure Fiberglass Line Pipe 15LE-2008 (R2013) (SPEC) Polyethylene (PE) Line Pipe 15S-2006 (R2013) (RP) Qualification of Spoolable Reinforced Plastic Line Pipe 17J-2014 (SPEC) Specification for Unbonded Flexible Pipe 17K-2005 (R2010) (SPEC) Specification for Bonded Flexible Pipe 510-20146 (STD) Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration 572-2009 (RP) Inspection Practices for Pressure Vessels 576-2009 (RP) Inspection of Pressure-relieving Devices 599-2013 (STD) Metal Plug Valves-Flanged, Threaded and Welding Ends 600-2009 (STD) Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets

602-2009 (STD) Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries 608-2012 (STD) Metal Ball Valves-Flanged, Threaded and Welding Ends 609-2009 (STD) Butterfly Valves: Double-flanged, Lug- and Wafer-type 610-2010 (STD) Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries 617-2002 (R2009) (STD) Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services 618-2007 (STD) Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services 650-2013 (STD) Welded Tanks for Oil Storage 651-2007 (RP) Cathodic Protection of Aboveground Petroleum Storage Tanks 652-2005 (RP) Linings of Aboveground Petroleum Storage Tank Bottoms 653-2009 (STD) Tank Inspection, Repair, Alteration, and Reconstruction 1604-1996 (R2010) (RP) Closure of Underground Petroleum Storage Tanks 2015-2014 (STD) Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks 2028-2002 (R2010) (RP) Flame Arresters in Piping Systems 2350-2012 (STD) Overfill Protection for Storage Tanks in Petroleum Facilities 2610-2005 (R2010) (STD) Design, Construction, Operation, Maintenance, and Inspection of Terminal & Tank Facilities Q1-2013 (SPEC) Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry

ASME (The American Society of Mechanical Engineers) B1.1-2003 (R2008) Unified Inch Screw Threads, (UN and UNR Thread Form) B1.20.1-2013 Pipe Threads, General Purpose, Inch B16.1-2010 Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 B16.5-2013 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard B16.9-2012 Factory-Made Wrought Buttwelding Fittings B16.11-2011 Forged Fittings, Socket-Welding and Threaded B16.20-2012 Metallic Gaskets for Pipe Flanges: Ring Joint, Spiral Wound, and Jacketed B16.21-2011 Nonmetallic Flat Gaskets for Pipe Flanges B16.24-2011 Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500 and 2500 B16.33-2009 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS ½ through NPS2) B16.34-2013 Valves Flanged, Threaded and Welding End B16.36-2009 Orifice Flanges B16.40-2013 Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems B16.47-2011 Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard B16.48-2010 Line Blanks B16.49-2012 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems

B18.2.1-2012 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) B18.2.2-2010 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series) B31G-2012 Manual for Determining the Remaining Strength of Corroded Pipelines B31.3-2012 Process Piping B31.8-2012 Gas Transmission and Distribution Piping Systems B31.8S-2012 Managing System Integrity of Gas Pipelines B36.19M-2004 (R2010) Stainless Steel Pipe Boiler and Pressure Vessel Code, 2013: Section II: Materials Section V: Nondestructive Examination Section VIII: Pressure Vessels — Division 1 Section VIII: Pressure Vessels — Division 2 — Alternative Rules Section IX: Welding and Brazing Qualifications PCC-2-2015 Repair of Pressure Equipment and Piping ASTM International (American Society for Testing and Materials) A53/A53M-12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless A105/A105M-13 Standard Specification for Carbon Steel Forgings for Piping Applications A106/A106M-14 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service A126-04 (R2014) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

A193/A193M-14 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications A194/A194M-14 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both A216/A216M-14 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service A234/A234M-13e1 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service A268/A268M-10 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service A269-14e1 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service A307-12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength A320/A320M-14 Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service A333/A333M-13 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness A350/A350M-13 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components A352/A352M-06 (2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service A354-11 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners A381-96 (2012) Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems

A395/A395M-99 (2014) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures A420/A420M-13 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service A563/A563M-07 Standard Specification for Carbon and Alloy Steel Nuts A694/A694M-13 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service A707/A707M-13 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service A789/A789M-10a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service A860/A860M-13 Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings A984/A984M-03 (withdrawn) Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded A1005/A1005M-00 (2010) Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded A1024/A1024M-02 (2012) Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless A1037/A1037M-05 (2012) Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded B43-14 Standard Specification for Seamless Red Brass Pipe, Standard Sizes B75/B75M-11 Standard Specification for Seamless Copper Tube B88-09 Standard Specification for Seamless Copper Water Tube B241/B241M-12e1 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings D257-14 Standard Test Methods for DC Resistance or Conductance of Insulating Materials D323-08(2014) Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) D570-98(2010)e1 Standard Test Method for Water Absorption of Plastics D1000-10 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics D1653-13 Standard Test Methods for Water Vapor Transmission of Organic Coating Films D1693-13 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics D2240-05 (2010) Standard Test Method for Rubber Property — Durometer Hardness D2290-12 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe D2343-09 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics D2412-11 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel- Plate Loading D2584-11 Standard Test Method for Ignition Loss of Cured Reinforced Resins D2837-2013 (E2014) Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe and Fittings D3261-2012 (E2014) Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials D3839-14 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting- Resin) Pipe D3895-07 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser D4541-09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers D5064-07 (2012) Standard Practice for Conducting a Patch Test to Assess Coating Compatibility D5084-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter E18-14 rev 4 Standard Test Methods for Rockwell Hardness of Metallic Materials E21-09 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials E23-12c Standard Test Methods for Notched Bar Impact Testing of Metallic Materials E29-13 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications E114-10 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing E384-11 (E2012) Standard Test Method for Knoop and Vickers Hardness of Materials

E747-04 (2010) Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology E1025-11 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology E1820-13 Standard Test Method for Measurement of Fracture Toughness E1901-13 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods F1290-08 (withdrawn) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings F1973-2013 (E2013) Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide II (PAII) and Polyamide 12 (PA12) Fuel Gas Distribution Systems F2206-11 (R2014) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) F2620-13 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints Using Tensile- Impact Method G8-96 (2010) Standard Test Methods for Cathodic Disbonding of Pipeline Coatings G9-07(2013)e1 Standard Test Method for Water Penetration into Pipeline Coatings G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings G11-04(2012) Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings G14-04 (2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) G17-07(2013) Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)

G18-07(2013) Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines G19-88 (withdrawn) Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial G20-10 Standard Test Method for Chemical Resistance of Pipeline Coatings G21-13 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi G42-11 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures G55-07 (2013) Standard Test Method for Evaluating Pipeline Coating Patch Materials G80-88 (withdrawn) Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings G154-12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials UOP163-10 Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration AWS (American Welding Society) A5.32/A5.32M-11 Welding Consumables — Gases and Gas Mixtures for Fusion Welding and Allied Processes D3.6M-10 Underwater Welding Code AWWA (American Water Works Association) C205-12 Cement-Mortar Protective Lining and Coating for Steel Water Pipe — 4 In. (100 mm) and Larger – Shop Applied BSI (British Standards Institution) BS EN 253:2013 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene BS EN 489:2009 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

BS 7910:2013 Guide to methods for assessing the acceptability of flaws in metallic structures PD 6493:1991 (withdrawn) Guidance on methods for assessing the acceptability of flaws in fusion welded structures CAPP (Canadian Association of Petroleum Producers) 2004-0022 Planning Horizontal Directional Drilling for Pipeline Construction 2009-0009 Best Management Practice — Use of Reinforced Composite Pipe (Non-Metallic Pipelines) 2009-0010 Mitigation of Internal Corrosion in Oilfield Water Pipelines 2009-0011 Mitigation of External Corrosion on Buried Pipeline Systems 2009-0012 Mitigation of Internal Corrosion in Oil Effluent Pipeline Systems 2009-0013 Mitigation of Internal Corrosion in Sour Gas Gathering Systems 2009-0014 Mitigation of Internal Corrosion in Sweet Gas Gathering Systems CCME (Canadian Council of Ministers of the Environment) PN 1180 Environmental Guidelines for Controlling Emissions of Volatile Organic Compounds from Aboveground Storage Tanks CEPA (Canadian Energy Pipeline Association) Stress Corrosion Cracking Recommended Practices, 2nd ed. (December 2007) Facilities Integrity Management Program (FIMP) Recommended Practices, 1st ed. (May 2013) Development of a Pipeline Surface Loading Screening Process & Assessment of Surface Load Dispersing Methods (Final Report No. 05-44R1) (October 2009) CGA (Canadian Gas Association) OCC-1-2013 Recommended Practice for the Control of External Corrosion on Buried or Submerged Metallic Piping Systems CGA (Common Ground Alliance) Best Practices, Version 10.0 (March 2012)

CGSB (Canadian General Standards Board) CAN/CGSB-48.9712-2014/ISO 9712:2012 Non-destructive Testing — Qualification and certification of NDT personnel DIN (Deutsches Institut für Normung e.V.) 30672-2000 Tape and shrinkable materials for the corrosion protection of buried or underwater pipelines without cathodic protection for use at operating temperatures up to 50 °C DNV (Det Norske Veritas) DNV-OS-F101-2013 Submarine Pipeline Systems DNV-RP-F101-2010 Corroded Pipelines DNV-RP-J202-2010 Design and Operation of CO2 Pipelines DOT (US Government, Department of Transportation) DTRS56-02-D-70036 (2005) Derivation of Potential Impact Radius Formulae for Vapor Cloud Dispersion Subject to 49 CFR 192 ESI (Electricity Supply Industry) 98-2-1979 (withdrawn) Ultrasonic Probes: Medium Frequency, Miniature Shear Wave, Angle Probes Government of USA US Code of Federal Regulations, Title 33, Chapter I, Part 154, Appendix A, “Guidelines for Detonation Flame Arresters” (referenced as 33 CFR 154, Appendix A) US Code of Federal Regulations, Title 49, Part 192, Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards (referenced as 49 CFR 192) IGEM (Institution of Gas Engineers & Managers) IGEM/TD/1 Steel pipelines and associated installations for high pressure gas transmission, ed. 5 The INGAA Foundation Guidelines for Parallel Construction of Pipelines, December 2008 ISO (International Organization for Standardization) 2566-1:1984 (R2010) Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels 3183:2012 Petroleum and natural gas industries — Steel pipe for pipeline transportation systems

3898:2013 Bases for design of structures – Names and symbols of physical quantities and generic quantities 5579:2013 Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules 9080:2012 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 12162:2009 Thermoplastics materials for pipes and fittings for pressure-applications — Classification, designation and design coefficient 12176-1:2012 Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 1: Butt fusion 12176-2:2008 Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 2: Electrofusion 12176-3:2011 Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 3: Operator’s badge 12176-4:2003 Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 4: Traceability coding 13953-2001 Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint 14175:2008 Welding consumables — Gases and gas mixtures for fusion welding and allied processes 14555:14 Welding — Arc stud welding of metallic materials 15156-2:2009 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons 15156-3:2009 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys 15653:2010 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds

16708:2006 Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators ISO TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of fusion operators ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection MSS (Manufacturers Standardization Society) SP-6-2012 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings ANSI/MSS-SP-25-2013 Standard Marking System for Valves, Fittings, Flanges and Unions SP-75-2014 Specification for High-Test, Wrought, Butt Welding Fittings SP-79-2011 Socket Welding Reducer Inserts (Includes Errata Amended 7/8/2012) SP-83-2014 Class 3000 Steel Pipe Unions, Socket-Welding and Threaded SP-95-2014 Swage(d) Nipples and Bull Plugs SP-97-2012 Integrally Reinforced Forged Branch Outlet Fittings — Socket Welding, Threaded and Buttwelding Ends NACE International ANSI/NACE MR0175/ISO 15156-2-2009 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons Note: Including circular 1-2011 and circular 2-2014. ANSI/NACE MR0175/ISO 15156-3-2009 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys Note: Including circular 1-2011, circular 2-2014, circular 3-2013, circular 4-2014.

SP0285-2011 Corrosion Control of Underground Storage Tank Systems by Cathodic Protection SP0204-2008 Stress Corrosion Cracking (SCC) Direct Assessment Methodology SP0206-2008 Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas SP0502-2008 Pipeline External Corrosion Direct Assessment Methodology NEB (National Energy Board) Pipeline Abandonment: A Discussion Paper on Technical and Environmental Issues, November 1996 NEN (Nederlands Normalisatie-instituut) 3650-1:2012 n1 Requirements for pipeline systems – Part 1: General requirements NFPA (National Fire Protection Association) 10-2013 Standard for Portable Fire Extinguishers 30-2015 Flammable and Combustible Liquids Code NRCC (National Research Council Canada) National Building Code of Canada, Chapter 4 of Commentary B, 2015 National Fire Code of Canada, 2010 PEI (Petroleum Equipment Institute) RP100-11 Recommended Practices for Installation of Underground Liquid Storage Systems PPI (Plastics Pipe Institute) TR-3-2012 Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe TR-4-2014 PPI Listing of Hydrostatic Design Basis (HDB), Hydrostatic Design Stress (HDS), Strength Design Basis (SDB), Pressure Design Basis (PDB) and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or Pipe PRCI (Pipeline Research Council International) PR-3-805,1989 Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe (RSTRENG)

PR-218-9822, 1999 Guidelines for the Assessment of Dents on Welds PR-218-9925, 2008 Acceptance Criteria for Mild Ripples in Pipeline Field Bend PR-227-9424, 2008 Installation of Pipelines by Horizontal Directional Drilling — An Engineering Design Guide PR-268-9823, 2003 Guidelines for the Seismic Design and Assessment of Natural Gas and Liquid Hydrocarbon Pipelines Report 194, 1992 Hydrotest Strategies for Gas Transmission Pipelines Based on Ductile-Flaw-Growth Considerations SSPC (The Society for Protective Coatings) PA 2-2004 Measurement of Dry Coating Thickness with Magnetic Gages Transport Canada 621.19-2000 Standards Obstruction Markings Manual

Read More:

CSA Z662-15 (Oil and gas pipeline systems)

LITTLE P.ENG. FOR ENGINEERS TRAINING /  Engineering Consultant

3705 Fonda Way #18 Southeast Calgary, T2A 6G9

Canada

+1 (587) 802-4050

Stay Connected

  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon
  • LinkedIn
  • yp-logo-original
  • Yelp Social Icon
  • Google Places Social Icon
  • Pinterest Social Icon
  • Tumblr
  • Facebook Social Icon