ASME B31.3 Pressure Design of Closures

Closures are covered in para. 304.4.1. Listed components, such as ASME B16.9 pipe caps, can be used for closures. The other two options...

ASME B31.3 Pressure Design of Miter Bends

ASME B31.3 Pressure Design of Miter Bends #Little_PEng. Engineering Consultant Services #ASMEB313PressureDesignofMiterBends #ASMEB313...

ASME B31.3 Pressure Design of Bends and Elbows

Bends were required to have, after bending, a wall thickness at least equal to the minimum required wall thickness for straight pipe in...

2,327 views0 comments

ASME B31.3 Branch Connection that are Presumed to Be Acceptable

Some specific types of branch connections are presumed to be acceptable. This, of course, includes listed fittings (e.g., ASME B16.9 tees...

ASME B31.3 Considerations for Branch Connections Under External Pressure

Branch connections under external pressure are covered in para. 304.3.6. The same rules described in Sections 4.4 and 4.5 are used....

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES

If you are looking for CANADA / US BASED Engineering Consultant Services ; Little P.Eng. for Engineering Services is ready to help you across Canada, USA and Arabian Gulf Area.