Piping Failure Theories, Stress Categories, Stress Limits, and Fatigue

Failure Theories The failure theories most commonly used in describing the strength of piping systems are the maximum principal stress...

2,673 views0 comments

ASME B31.3 Limitations on Miscellaneous Joints

Caulked and soldered joints are only permitted in Category D Fluid Service. Caulked joints are further limited to a maximum temperature...

ASME B31.3 Limitations Tubing Joints

Tubing joints are covered by para. 315, and include flared, flareless, and compression-type tube fittings. ASME B31.3 provides some...

ASME B31.3 Limitations on Threaded Joints

Most threaded joints in ASME B31.3 piping systems are made with taper threads in accordance with ASME B 1.20.1. Figure 5.1 shows a taper...

2,254 views0 comments

ASME B31.3 Limitations on Flanged Joints

Flanges are discussed in previous post (ASME B31.3 Limitations on Flanges). Additional requirements for flanged joints are provided in...

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES

If you are looking for CANADA / US BASED Engineering Consultant Services ; Little P.Eng. for Engineering Services is ready to help you across Canada, USA and Arabian Gulf Area.