ASME B31.3 Design for Sustained and Occasional Loads | Calgary, AB

Sustained loads and Occasional loads are among the most important concerns as per ASME B31.3 Code. Thus, Little P.Eng. For Engineers...

7,379 views0 comments

ASME B31.3 PDF | Process Piping | Calgary, AB

Responding to evident need and at the request of The American Society of Mechanical Engineers, the American Standards Association...

ASME B31.3 Limitations on Miscellaneous Joints

Caulked and soldered joints are only permitted in Category D Fluid Service. Caulked joints are further limited to a maximum temperature...

ASME B31.3 Limitations Tubing Joints

Tubing joints are covered by para. 315, and include flared, flareless, and compression-type tube fittings. ASME B31.3 provides some...

ASME B31.3 Limitations on Threaded Joints

Most threaded joints in ASME B31.3 piping systems are made with taper threads in accordance with ASME B 1.20.1. Figure 5.1 shows a taper...

1,930 views0 comments

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES

If you are looking for CANADA / US BASED Engineering Consultant Services ; Little P.Eng. for Engineering Services is ready to help you across Canada, USA and Arabian Gulf Area.