Pipe Stress Analysis of Piping Systems Using CAESAR II

Pipe Stress Analysis of Piping Systems Using CAESAR II - Alberta; British Columbia; Saskatchewan; Ontario. By Meena Rezkallah, P.Eng. piping stress engineer

Meena Development LTD. provides full-services and specialized pipe stress analysis using CAESAR II for piping and pipelines across Canada & globally as per per API, ASME B31.3, B31.1, B31.8, B31.4, CSA Z662 codes for all industries. Our Canadian professional Engineers are ready to authenticate, validate piping packages.

Pipe Stress Analysis Services Using CAESAR II

• Linear and non-liner static analysis

• Dynamic analysis including earthquake and hydraulic shock, and oscillation analysis

• Analysis of underground piping systems

We provide stress analysis for process piping, power piping and pipelines on the ground and underground.

For pipe stress analysis and calculation, we use CAESAR II or according to the client´s individual needs. It offers opportunity of a multitude of analysis types – static, dynamic (first-order, second-order theory for linear or non-linear boundary conditions).

Complex analysis consists of:

• strength analysis of pipelines

• calculation of allowable stress of piping systems and associated structures

• nozzle load of associated devices and apparatuses

• pipeline dilatation and piping movements

• optimization for safe operation and cost minimization

• concept of flexible and uniform bearings, compensators, dynamic brakes and silencers if necessary for systems

• fatigue analysis

• flange joints analysis

• optimization of piping systems

• preparation of isometrics and program outputs

• calculation report (also as provable documentation)
  

We provide analysis for following operational states:

• dead load and overpressure including pressure test and assembly state

• restricted dilatation loads

• wind loads

• earthquake loads

• force excitation loads

• settlement loads

• impact loads

• unsteady flow of fluid

• emergency states – piping system whip etc.

• water hammer and relief Valve force

The documentation is also provable for authorization by CAESAR II report capabilities

We are aware of our responsibility thus we strive to find the most suitable solution for our clients which will not only guarantee safe system operation, but also significantly lower costs for supply of piping systems greatly exceeding costs for the analysis itself.

Pipe Stress Analysis services of piping systems – codes and standards:

• ASME B31.1, ASME B31.3, ASME B31.4, ASME B31.5, ASME B31.8

• ASME Class 1, ASME Class 2, ASME Class 3

• EN 13480 - 3

• EN 1591

• AGFW

• KTA 3211.2, KTA 3201.2

• BS 7159

• KRV

• WRC 537 (107)

• WRC 297

• CSA Z662

• CSA Z245.1

• API RP 1102
  

Design and Construction of Piping Supports System

• Design and optimization of the concept of piping supports system

• Dimensioning of piping supports system

• Design of piping supports system

• Detailed design in the CAD programs

---

Located in Calgary, Alberta; Vancouver, BC; Toronto, Ontario; Buena Park, California;, We offer our Piping Engineering Services, Skid Design Services, Pipeline Engineering Services and Structural Engineering Services across Canada. To get our Piping Stress Analysis Services, please contact our Engineering company.

Our professional piping stress engineers have a bachelor's and Masters degree in mechanical / structural engineering and province license (P.Eng.) in Alberta, Saskatchewan, British Columbia and Ontario. We review, validate, certify and stamp piping and structural packages. Also check Industries We Serve.

We provide premium piping engineering & full-service pipe design and pipeline / pipe stress analysis services, from initial concept through final construction. We serve all types of industries across Canada & globally. Using CAESAR II and pipe stress calculations as per API, ASME B31.3, B31.1, B31.8, B31.4, B31.9, CSA Z662.